Glass is the first thing a customer looks through before deciding to walk in, and smudged doors or a dusty display window say something about the business behind them. A typical visit starts at ground level. The crew wipes down frames and sills, vacuums or brushes out tracks, then washes the glass with a squeegee or a water-fed pole. Interior glass, door push plates and partitions are usually done by hand. Upper panes on a low-rise building can often be reached from the ground with a pole, which keeps ladders out of the picture.
Water-fed pole systems pump purified water through a brush on a long telescoping pole. Because the minerals have been stripped out of the water, it dries without leaving spots, and no squeegee is needed. That makes it a good fit for single-story and two-story buildings. Anything taller than a few stories is a different job. Lifts, boom equipment or rope access come into play, and that work belongs with specialists who carry proper fall protection and know how to rig it. A general janitorial crew should not be leaning out of upper windows.
Not every mark comes off with soap and a squeegee. Hard water spots from sprinkler overspray bond to glass and need a dedicated mineral remover, sometimes followed by polishing. Construction residue such as paint overspray, stucco splatter and sticker glue is usually lifted with a fresh blade held at a careful angle, and a careless scraper can scratch a pane for good. Some coated or tinted glass calls for gentler methods too. Pointing out the problem panes before the visit saves a second trip and keeps the crew from treating a stubborn spot as ordinary dirt.
Sun, dust and glass across southern Utah
South-facing glass in St. George takes strong sun most of the year, and that light shows every streak, fingerprint and film of dust on the pane. Red dust settles in a fine coat over exterior glass, frames and sills, and it packs into window tracks, where it grinds every time a slider opens. Storefronts in Washington and Hurricane and offices off St. George Boulevard deal with the same thing. For a business with big front windows, a regular schedule keeps the view clear for customers inside and for people walking past who might become customers.
Long hot days shape the timing here. Exterior work on sun-baked glass goes better early in the morning, because cleaning solution flashes dry on hot panes and leaves streaks behind. Retail shops usually want the outside done before opening and the inside done after close, so no shopper has to step around a ladder. Clinics and offices are more flexible, though lobby glass still tends to get done outside business hours. Say which side of the building catches the afternoon sun when you ask for pricing.
What sets the price of a window visit
- Pane count and size
- Jobs are usually priced by the number and size of panes or by total glass area. Divided-light windows and lots of small panes take longer than a few big sheets.
- Height and access
- Ground-floor glass a pole can reach is the simplest work. Upper stories that need a lift, boom or rope access bring in specialist crews, extra equipment and more setup time.
- Inside, outside or both
- Exterior-only visits move faster. Adding interior glass means working around desks, displays and furniture, and it sometimes has to happen after hours to stay out of the way.
- Condition of the glass
- Hard water spotting, construction residue or a long gap since the last cleaning adds treatment steps, careful blade work and extra minutes on every pane.
How often commercial window cleaning tasks tend to run
| Job | Frequency |
|---|---|
| Entry door glass and handles | Every janitorial visit |
| Storefront glass, inside and out | Weekly or every other week |
| Lobby glass and interior partitions | Weekly to monthly |
| Office exteriors on low-rise buildings | Monthly to quarterly |
| Frames, sills and tracks detailed | Quarterly |
| Upper-story exteriors by specialists | Once or twice a year |
| Hard water spot treatment | As needed |
Treat this as a starting draft. The provider will adjust it after walking your building and talking through how your people use the space.
What the work usually covers
- Interior and exterior glass panes
- Entry doors, push plates and handles
- Frames and sills wiped down
- Window tracks vacuumed and detailed
- Screens removed, brushed and replaced
- Water-fed pole work on low-rise exteriors
- Spot removal for hard water marks
- Sticker, tape and paint residue scraped safely
You and the provider nail down the exact tasks and schedule when they put the quote together.
Guides that go with commercial window cleaning
Commercial Window Cleaning by type of business
Where requests reach us from
Businesses across the St. George area send us commercial window cleaning requests, from St. George, Washington, Hurricane, Santa Clara, Ivins, Bloomington and beyond. See all areas.
More cleaning services in St. George
- Commercial Cleaning in St. George
- Office Cleaning in St. George
- Janitorial Services in St. George
- Medical Office Cleaning in St. George
- Floor Care in St. George
- Post-Construction Cleaning in St. George
- Day Porter Services in St. George
- Commercial Carpet Cleaning in St. George
- Disinfection Services in St. George
